The article considers the possibilities of fiber-optic thermometry systems for monitoring the operation of wells and downhole equipment, as well as their features of data recording. The potential ability of fiber-optic distributed thermometry sensors to measure the temperature field along the entire wellbore makes it possible to almost instantly register its changes. The experience of complex study of a multilateral horizontal well by fiber-optic thermometry and a geophysical instrument is presented. In the well, the inflow profile was determined and the working sections of the main wellbore and the places of fluid inflow from the second and third sidetracks were identified. Comparison of the results of thermometry recorded by systems of different types showed their good convergence only at the end of the horizontal section, which suggests the o slight inflow from the “toe” part of the wellbore. At the same time, both systems did not register extreme temperature changes during compression induction, which indicates the random nature of the measurements performed by the fiber optic system. The measurements did not coincide in time with transient processes. Despite the advantages of standard thermometry in terms of measurement accuracy and more reliable metrological support, measurement of temperature anomalies of fast local processes is possible only using fiber-optic distributed thermometry sensors or thermocouples with a significant number of point sensors. Long-term monitoring requires the use of corrosion-protected geophysical cables with fiber optic modules, usually reinforced (polymer-coated), which reduces its thermal conductivity. To improve the measurements accuracy it is necessary to use fiber-optic systems with the highest possible sensitivity, which is determined by thermal inertia and depends mainly on the specific heat capacity and thermal conductivity of the cable layers. It is shown the necessity of consideration of distorting factors influence, the correct choice of data recording parameters, as well as resolution and thermal inertia of the fiber-optic geophysical cable.
References
1. Klishin I.A., Perspektivnye metody issledovaniya deystvuyushchikh neftyanykh i gazovykh skvazhin (Promising methods for studying operating oil and gas wells), Collected papers “Geologiya i neftegazonosnost' Zapadno-Sibirskogo megabasseyna (opyt, innovatsii)“ (Geology and oil and gas potential of the West Siberian megabasin (experience, innovations)), Proceedings of 10th international scientific and technical conference (dedicated to the 60th anniversary of the Tyumen Industrial University), Tyumen, 2016, pp. 66–70.
2. Lapshina Yu.V., Rybka V.F., The result of the application of distributed fiber-optic technology in thermometry of development wells with ESP (In Russ.), Ekspozitsiya Neft' Gaz, 2013, no. 7(32), pp. 13–16.
3. Kostitsyn V.I., Savich A.D., Shumilov A.V. et al., Combination of secondary drilling technologies and long-term formation monitoring (In Russ.), Neftyanoe khozyaystvo = Oil Industry, 2019, no. 9, pp. 108–113, DOI: 10.24887/0028-2448-2019-9-108-113
4. Yakin M.V., Safiullin I.R., Korovin V.M., Adiev I.Ya., Evaluation of individual hydrodynamical properties of formations from the results of a long-time monitoring over well operation by a Sprut well logging set (In Russ.), Avtomatizatsiya, telemekhanizatsiya i svyaz' v neftyanoy promyshlennosti, 2016, no. 12, pp. 80-93.
5. Beresnev V.V., Arbuzov A.A., Vakhitov I.D. et al., Digital downhole pressure and temperature monitoring systems without downhole electronics for gas wells (In Russ.), Gazovaya promyshlennost', 2020, №7 (803), pp. 32–33.
6. Malkina V.D., Galimov T.I., Vasyutinskaya S.I., Kiselev A.G., Innovative PetroLight complex well monitoring system (In Russ.), Nauchnyy zhurnal Rossiyskogo gazovogo obshchestva, 2015, no. 2–3, pp. 59–64.
7. Polyakov A.V., Prokopenkova T.D., Avtomatizirovannaya optoelektronnaya izmeritel'naya sistema (Automated optoelectronic measuring system), Collected papers “Mezhdunarodnyy kongress po informatike: informatsionnye sistemy i tekhnologii“ (International Congress on Informatics: Information Systems and Technologies), Proceedings of international scientific congress, 2016, pp. 793–797.
8. Turbin A.I., Kalas V.O., Vasyutinskaya S.I., System of extended facilities` monitoring “Omega”: New options provided by fiber-optic sensors (In Russ.), Russkiy inzhener, 2015, no. 4(47), pp. 27–31.
9. URL: https://silixa.com/technology/ultima-dts/
10. Buyanov A.V., Monitoring profilya pritoka (priemistosti) v gorizontal'nykh skvazhinakh po rezul'tatam raspredelennoy nestatsionarnoy termometrii (Monitoring of the inflow profile (injectivity) in horizontal wells based on the results of distributed non-stationary temperature logging): thesis of candidate of technical science, Moscow, 2019.
11. Paramonov A.V., Nikol'skaya L.V., Klepinina I.A., Ermolov A.V., Fizika. Optika (Physics. Optics), Part 2. Volnovaya optika (Wave optics), Tula: Publ. of Tula State Lev Tolstoy Pedagogical University, 2013, 109 p.
12. Smolen J.J., van der Spek A., Distributed temperature sensing - A DTS primer for oil & gas production, Shell International Exploration and Production, Netherlands, Hague, 2003, 97 p.
13. Soto M.A., Bolognini G., Di Pasquale F., Thẻvenaz L., Distributed strain and temperature sensing over 50 km of SMF with 1 m spatial resolution employing BOTDA and optical pulse coding, Proceedings of 20th international conference on optical fiber sensors, 2009, DOI: 10.1117/12.848791
14. Soto M.A., Bolognini G., Di Pasquale F., Thẻvenaz L., Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range, Optics letters, 2010, no. 2, pp. 259–261, DOI:10.1364/OL.35.000259