Currently, among the specialists accompanying geological prospecting work in Eastern Siberia, the task of technological "re-equipment" is becoming especially urgent, including at the first stage pilot operations with modern equipment and an assessment of the applicability of the latter in the specific conditions of the geological section. At present, experience has been accumulated in conducting research on oil and gas objects throughout the license areas of the Irkutsk region. The share of research for 2017-2020 falling on the mini-DST + casing test complex, in relation to the total volume of exploratory drilling, is 65%. The mini-DST + casing test assumes preliminary open hole testing immediately after completion of drilling (classified as a special logging complex), followed by testing after casing and perforating the wellbore. Due to the presence of a special logging complex, the saturation estimate is refined by standard logging methods and, if there are fluid sections in the reservoir section, the testing strategy is adjusted. The full-scale complex of testing in a casing string means operational staging from secondary opening by perforation, preliminary stimulation of oil production (hydrochloric bath, acid treatment), long-term working out on chokes in free-flow production, etc. The standard layout of the considered formation testers is a modular assembly / instrument set. The main tools for well testing are the clamping probe arrangement and the dual packer / pumping module. The paper presents the results of determining the reservoir properties, reservoir pressure measurements, the quality of deep oil samples when testing carbonate reservoirs on drill pipes in an open hole and the data obtained by full-scale cased-hole well test complex. Comparison of these two methods results make it possible to assess the applicability and reliability of mini-DST for testing the geological and physical characteristics of complex oil and gas reservoirs of the carbonate type.
References
1. Natarajan K.K., Joshi S., Banerjee R., Sundaram K.M., A new method for gas well deliverability potential estimation using MiniDST and single well modeling: Theory and examples, SPE-113650-MS, 2008, DOI:10.2118/113650-MS.
2. Varlamov P.S., Griguletskiy V.G., Varlamov G.P., Varlamov S.P., Plastoispytatel'noe oborudovanie dlya gidrodinamicheskikh issledovaniy plastov neftyanykh i gazovykh skvazhin (Formation testing equipment for hydrodynamic studies of oil and gas wells), Ufa, 2005, 620 p.
3. Houz? O., Viturat D., Fjaere O.S., Dynamic data analysis: The theory and practice of pressure transient and production analysis & The use of data from permanent downhole gauges, URL: https://www.kappaeng.com/documents/flip/dda51001/files/assets/basic-html/
4. Federal norms and rules in the field of industrial safety “Pravila bezopasnosti v neftyanoy i gazovoy promyshlennosti” (Safety rules in the oil and gas industry), Series 08, Issue 19, Moscow: Publ. of Scientific technical center of industrial safety problems research, 2013, 288 p.
5. Brusilovskiy A.I., Fazovye prevrashcheniya pri razrabotke mestorozhdeniy nefti i gaza (Phase transformations in the development of oil and gas fields), Moscow: Graal' Publ., 2002, 575 p.