The formation of solid deposits of paraffin contained in oil on the inner surface of tubing is one of the adverse factors that significantly complicate the operation of oil wells. Existing methods of cleaning of pipes from paraffin deposits are considered. The scheme and design of the hydro-mechanical device used for cleaning inner surfaces of tubing from paraffin deposits have been developed. Laboratory and practical tests of the developed device are conducted. According to the test results, we can say that hydro-mechanical methods of purification from paraffin deposits are the one of most effective. Setting of drive allows to promote automation of cleaning of tubing, that is provided by absence of necessity of creation of axleloading on stem - from action of expense and pressure of liquid a device independently moves in the cavity of tubing. Also it should be noted that a drive promotes efficiency of process of destruction of paraffin due to creation of oscillation influence. Experimental laboratory researches of drive of cleansing device proved his capacity at the expense of liquid from 0,15 to 0,63 l/s. At the indicated range of expense of liquid the drive of cleansing device provides his steady vibromoving. It is set that high speed of vibromoving of cleansing device is arrived at the expense of liquid from 0,55 to 0,63 l/s. During realization of commercial tests of an experience construction of hydro-mechanical device a cleaning process took place in the automatic mode at the observance of the same values of parameters of temperature and pressure of festering of the heated water in cleansing device, that were set for standard technology of cleaning of tubing in oil and gas mining companies. The conducted laboratory and experimental experiments of the worked out device allow to recommend it for the use in field practice.
References
1. Ibragimov N.G., Povyshenie effektivnosti dobychi nefti na mestorozhdeniyakh Tatarstana (Improving the efficiency of oil production in the fields of Tatarstan), Moscow: Nedra-Biznestsentr Publ., 2005, 316 p.
2. Zaripova L.M., Gabdrakhimov M.S., Minnivaleev A.N., Vasil'eva E.R., Vibratsionnye ustroystva dlya ochistki vnutrenney poverkhnosti neftepromyslovykh trub (Vibration device for cleaning the internal surface of oilfield pipes), Collected papers “Perspektivnye innovatsii v nauke, obrazovanii, proizvodstve i transporte” (Perspective innovations in science, education, production and transport 2013: collection of scientific works), 2013, V. 14, no. 4, pp. 30–37.
3. Utility patent no. 113181 RF, MPK V 08 V 9/055, Ustroystvo dlya ochistki vnutrenney poverkhnosti truboprovodov (Device for cleaning the internal surface of pipelines), Inventors: Gabdrakhimov M.S., Zaripova L.M., Davydov A.Yu., Minnivaleev A.N.
4. Minnivaleev A.N., Zaripova L.M., Sovershenstvovanie ochistki nasosno-kompressornykh trub (Improving cleaning of pump-compressor pipes), Proceedings of 39th all-Russian scientific-technical conference of young scientists, postgraduates and students, Pert 3, Ufa: USPTU, 2012, pp. 211–215.
5. Zaripova L.M., Razrabotka nizkochastotnogo gidrodinamicheskogo pul'satora dlya povysheniya effektivnosti ochistki ot asfal'tosmoloparafinovykh otlozheniy neftepromyslovykh truboprovodov (Development of a low-frequency hydrodynamic pulsator to improve the efficiency of purification from asphalt-resin-paraffin deposits of oilfield pipelines): thesis of candidate of technical science, Ufa, 2009, 22 p.
6. Prozorova K.V., Loskutova Yu.V., Yudina N.V., Rikkonen S.V., Vibration method and integrating additives for removal of asphalt-resin-paraffin deposits (In Russ.), Neftegazovye tekhnologii, 2000, no. 5, pp. 13–16.